DIN6899A Wire Rope Thimble

DIN6899A Wire Rope Thimble

DIN6899A thimble has a teardrop shape. The curve is smooth. The groove is deep. The ends are wide. The metal is strong. The rope fits tightly inside.It is used with wire rope. It protects the loop. It keeps the shape. It stops the rope from breaking.Compared to simple thimbles, it has thicker sides. It gives better support. It holds more load. It lasts longer.
Skicka förfrågan
chatta nu
Beskrivning

Specifikationer

HF-7019HF-7019

HF-7019

 

 

Produktinformation

 

Produktnamn DIN6899A Wire Rope Thimble
Objektnummer Hf -7019
Material Rostfritt stål 304/316
Moq 100 st
Certifikat ISO9001
Ursprungsort Shandong, Kina

Oem

Accepterad
Prov

Godtagbar

 

Beskrivning

The DIN6899A Wire Rope Thimble is a teardrop-shaped steel fitting. It is designed for creating reinforced eyes at the end of a wire rope. The body is forged and follows the DIN6899A standard. It has a wide and deep groove that fits the wire rope snugly. The side walls are thick och hjälp att hålla formen på slingan under spänning .

Den öppna spåren vid basen gör att repet kan lindas runt fingerborget enkelt . Den rundade bakdelen sprider lasten över ett större område i repet . Detta förhindrar skador på trådsträngarna . Det håller också ögonen runt och enhetlig under upprepad användning {} deformation .

Compared to basic light-duty thimbles, DIN6899A has a wider back and thicker steel. It handles higher loads. It gives longer life in tough conditions. It also offers better protection when used with wire ropes in lifting, hoisting, marine, or rigging applications.

DIN6899A is different from DIN6899B. Type A has a heavier design and is better for industrial or offshore use. It is preferred in construction, cranes, cargo slings, and marine cable setups. It helps the wire rope last longer and keeps the system safe.

Denna fingerborg finns i många storlekar . Den passar rep från 2 mm till över 40 mm . Materialet är vanligtvis rostfritt stål eller galvaniserat stål för korrosionsskydd .}

 

Vanliga frågor

F: Vad är skillnaden mellan DIN6899A och DIN6899B?

A: DIN6899A är tjockare och tyngre . Det är gjord för industriellt bruk . din6899b är lättare .

F: Kan denna fingerborg användas med fiberrep?

A: Nej . Det är designat för ståltråd rep . fiberrep är för mjukt och kanske inte passar bra .

F: Är denna fingerborg som är bra för marin användning?

A: Ja . Rostfritt ståltyp är korrosionsbeständig och fungerar bra i marina områden .

F: Vilken storlek rep passar det?

S: Det passar rep från 2 mm till 40 mm, beroende på modell .

F: Håller det slingan från att plattas ut?

A: Ja . De tjocka väggarna skyddar ögat från att krossa eller böja .

Populära Taggar: DIN6899A Wire Rope Thimble, China Din6899a Wire Rope Thimble Manufacturer, Leverantörer, Factory, Öppen Top Chrible